Plinth insulation under plaster

Optimal thermal and moisture protection in the perimeter area.

JACKODUR with structured surface insulates reliably and bonds securely.

Following the installation of perimeter insulation, a thermally insulated baseboard may be used in the base area. The base area is the part of a façade exposed to splash water, beginning directly at the surface of the ground and extending to a height of at least 30 cm. JACKODUR has a textured surface and is resistant to damp and moisture. The textured surface provides excellent adhesive tensile values (≥ 0,2 N/mm²) and is ideal as a baseboard in the base area. Lay the JACKODUR Gefiniert insulation boards closely butted using a suitable adhesive mortar, using the bead-dot procedure, then secure with dowels. Three different versions of plaster finish are possible according to the information sheet on installing and plastering extruded polystyrene foam boards with rough or waffled surfaces used as thermal bridge insulation

Image 1 / 2: 02-009-JACKODUR-Gefiniert as plinth insulation
Image 2 / 2: 02-011-JACKODUR-Bonding and dowelling JACKODUR® Gefiniert as plinth insulation